Series: DC22

IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, PCB Mounting

25 Variants

Connectors (Inlets/Outlets)

C14

70° C

Approvals and Compliances

CAD

Description DC22

Description

Panel mount: Screw-on mounting on PCB rear-side
3 Functions: Appliance Inlet Protection class I, Line Switch 1 or 2 pole, Line filter in standard and medical version
For PCB mounting

Characteristics

Ultra-compact design
All single elements are already wired
Line switch non-illuminated or illuminated
With EMC-shield
Especially suitable for use in switching power supplies
Ideal for application with high transient loads
For applications according IEC/UL 62368-1 we recommend variants with bleed resistor
Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP)

Other versions on request

Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3
Other rocker marking
Illuminated green
Medical Version (M80)
Capacitance CX1

Detailed request for product

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Details DC22

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Electrical Data

Ratings IEC

1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA

1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current

standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)

Dielectric Strength

> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)

Allowable Operation Temperature

-25 °C to 85 °C

Climatic Category

25/085/21 acc. to IEC 60068-1

IP-Protection

front side IP40 acc. to IEC 60529

Protection Class

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

For PCB mounting : Ground terminal: Quick connect terminals 6.3 x 0.8 mm angled to pin axis

Panel Thickness S

Screw: max 4 mm
Mounting screw torque max 0.5 Nm

Material

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

C14 acc. to IEC 60320-1,
UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Line Switch

Rocker switch 1-/2-pole, non-illuminated or illuminated red, acc. to IEC 61058-1
Technical Details

Line Filter

Standard and Medical Version, IEC 60939, UL 60939-3, CSA C22.2 no. 8
Technical Details

MTBF

> 2'100'000 h acc. to MIL-HB-217 F

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: DC22

Approval Logo	Certificates	Certification Body	Description
	VDE Approvals	VDE	Certificate Number: 40001522
	UL Approvals	UL	UR File Number: E495089

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60939	Passive filters for suppressing electromagnetic interference
Designed according to	IEC 61058-1	Switches for appliances. Part 1. General requirements
Designed according to	UL 498	Standard for Attachment Plugs and Receptacles
Designed according to	UL 60939-3	Passive filters for suppressing electromagnetic interference
Designed according to	CSA C22.2 no. 42	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to	CSA C22.2 no. 8	Electromagnetic interference (EMI) filters

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
	Suitable for applications acc.	IEC 60601-1	Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
Medical Equipment	SCHURTER AG	Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP)

Dimension [mm]

	Screw-on mounting

	1) all pins



	2) PE additionally as quick-connect terminal 6.3 x 0.8

Diagrams

	Standard filter 1-pole

	1) Line 2) Load

	Standard filter 2-pole

	1) Line 2) Load

	Medical filter 1-pole (M5)

	1) Line 2) Load

	Medical Version (M5) 2-pole

	1) Line 2) Load

	Standard filter 2-pole illuminated

	1) Line 2) Load

	Medical Filter 2-pole (M5) illuminated

	1) Line 2) Load

Technical Data of Filter-Components

Rated Current [A]	Filter-Type	Inductances L [mH]	Capacitance CX [nF]	Capacitance CY [nF]	R [MΩ]
1	Standard version	2 x 10	100	2.2	1
2	Standard version	2 x 4	100	2.2	1
4	Standard version	2 x 1.5	100	2.2	1
6	Standard version	2 x 0.8	100	2.2	1
10	Standard version	2 x 0.3	100	2.2	1
1	Medical Version (M5)	2 x 10	100	-	1
2	Medical Version (M5)	2 x 4	100	-	1
4	Medical Version (M5)	2 x 1.5	100	-	1
6	Medical Version (M5)	2 x 0.8	100	-	1
10	Medical Version (M5)	2 x 0.3	100	-	1

Attenuation Loss

Standard version

	1 A

	2 A

	4 A

	6 A

	10 A

Medical version (M5)

	1 A

	2 A

	4 A

	6 A

	10 A

Short Table of Variants DC22 Open complete table DC22

Rated current	Filter-Type	Line Switch	Order Number Variant Details
[A]


1	Standard version	1-pole	DC22.1111.111	...
2	Standard version	1-pole	DC22.2111.111	...
4	Standard version	1-pole	DC22.4111.111	...
6	Standard version	1-pole	DC22.6111.111	...
10	Standard version	1-pole	DC22.9111.111	...
1	Standard version	2-pole	DC22.1121.111	...
2	Standard version	2-pole	DC22.2121.111	...
4	Standard version	2-pole	DC22.4121.111	...
6	Standard version	2-pole	DC22.6121.111	...
10	Standard version	2-pole	DC22.9121.111	...
1	Standard version	2-pole	DC22.1123.111	...
2	Standard version	2-pole	DC22.2123.111	...
4	Standard version	2-pole	DC22.4123.111	...
6	Standard version	2-pole	DC22.6123.111	...
10	Standard version	2-pole	DC22.9123.111	...
1	Medical Version (M5)	2-pole	DC22.1221.111	...
2	Medical Version (M5)	2-pole	DC22.2221.111	...
4	Medical Version (M5)	2-pole	DC22.4221.111	...
6	Medical Version (M5)	2-pole	DC22.6221.111	...
10	Medical Version (M5)	2-pole	DC22.9221.111	...
1	Medical Version (M5)	2-pole	DC22.1223.111	...
2	Medical Version (M5)	2-pole	DC22.2223.111	...
4	Medical Version (M5)	2-pole	DC22.4223.111	...
6	Medical Version (M5)	2-pole	DC22.6223.111	...
10	Medical Version (M5)	2-pole	DC22.9223.111	...

Packaging unit

10 Pcs

Table of Variants DC22

Rated current	Filter-Type	Line Switch	Illumination	Color	Weight [g]	V-Lock	Order Number Variant Details	PU
[A]


1	Standard version	1-pole		-	67 g	•	DC22.1111.111	20
2	Standard version	1-pole		-	67 g	•	DC22.2111.111	20
4	Standard version	1-pole		-	67 g	•	DC22.4111.111	20
6	Standard version	1-pole		-	67 g	•	DC22.6111.111	20
10	Standard version	1-pole		-	67 g	•	DC22.9111.111	20
1	Standard version	2-pole		-	67 g	•	DC22.1121.111	20
2	Standard version	2-pole		-	67 g	•	DC22.2121.111	20
4	Standard version	2-pole		-	67 g	•	DC22.4121.111	20
6	Standard version	2-pole		-	67 g	•	DC22.6121.111	20
10	Standard version	2-pole		-	67 g	•	DC22.9121.111	20
1	Standard version	2-pole	•	red	67 g	•	DC22.1123.111	20
2	Standard version	2-pole	•	red	67 g	•	DC22.2123.111	20
4	Standard version	2-pole	•	red	67 g	•	DC22.4123.111	20
6	Standard version	2-pole	•	red	67 g	•	DC22.6123.111	20
10	Standard version	2-pole	•	red	67 g	•	DC22.9123.111	20
1	Medical Version (M5)	2-pole		-	67 g	•	DC22.1221.111	20
2	Medical Version (M5)	2-pole		-	67 g	•	DC22.2221.111	20
4	Medical Version (M5)	2-pole		-	67 g	•	DC22.4221.111	20
6	Medical Version (M5)	2-pole		-	67 g	•	DC22.6221.111	20
10	Medical Version (M5)	2-pole		-	67 g	•	DC22.9221.111	20
1	Medical Version (M5)	2-pole	•	red	67 g	•	DC22.1223.111	20
2	Medical Version (M5)	2-pole	•	red	67 g	•	DC22.2223.111	20
4	Medical Version (M5)	2-pole	•	red	67 g	•	DC22.4223.111	20
6	Medical Version (M5)	2-pole	•	red	67 g	•	DC22.6223.111	20
10	Medical Version (M5)	2-pole	•	red	67 g	•	DC22.9223.111	20

Packaging unit

10 Pcs

References / Document Downloads

References DC22

Alternative: version without line filter (1)

[Swipe to the left and right for more options]

DC21

Alternative: Standard version (1)

[Swipe to the left and right for more options]

DC21

Mating Components DC22

Mating Outlets/Connectors (8)

[Swipe to the left and right for more options]

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

4788

4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I

5091

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

Mating Outlets/Connectors shuttered (2)

[Swipe to the left and right for more options]

4783

4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

VAC13KS

VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black

Accessories DC22

Accessories (1)

[Swipe to the left and right for more options]

Cord retaining kits

Cord retaining strain relief

16.05.2024

Transformation_Date:	2024-05-16 22:25:09
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_EMV/DS_PrGrp_WF_EMV_PG06_Export/2024_05_16/16_08_46_535_551358/PGRSplits/
Export_Lang:	en
SGE_Name:	EMC Products
PG_Name:	Power Entry Modules with Line Filter
Typ_Name:	DC22
Typ_AliasNames:	:dc22:
Typ_ID:	374
Typ_Hierarchie:	020060180000001536
Typ_EPIM_Order:	100
Typ_Titel:	IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, PCB Mounting
PublPrgr_Name:	Power Entry Modules with Filter
PublPrgr_Shortcut:	PG06
Variant table:	Variantentabelle V65 (22991)